PRESS RELEASE: Mazama unveils world's hottest enhanced geothermal system•TECHNOLOGY: Mazama debuts Thermal Lattice® reservoir technology
PRESS RELEASE: Mazama unveils world's hottest enhanced geothermal system•TECHNOLOGY: Mazama debuts Thermal Lattice® reservoir technology
Illustration of a MUSE well field: pairs of horizontal wells in layers beneath one small surface pad
MUSE™ — Modular Unconventional Superhot Energy

One system, not one bet

MUSE drills superhot rock, engineers a reservoir in it, and forecasts the power it will deliver for years. Three systems designed together, so no single breakthrough has to carry the plan.

Inside the explainer

From the first well to the field

  1. 01

    Drill the first well

    A rig drills straight down, then turns the well so it runs flat through the hottest rock. Horizontal wells maximize the reservoir volume and the heat that can be extracted.

  2. 02

    Carbon ChillTM keeps the tools cool

    As the rock heats up, drilling switches to Carbon ChillTM. Supercritical carbon dioxide (CO₂) cools at the bit, right where the electronics that steer the well are, and the chill helps the bit cut faster.

    Explore Carbon ChillTM →

  3. 03

    A second well alongside

    The rig slides across the pad and drills a second well beside the first. Together the two wells form a doublet: one injector and one producer.

  4. 04

    Open pathways, stage by stage

    Completion fluid is pumped into one short section at a time, from the far end of each well back toward the start. Each stage opens pathways through the rock, and the two wells take turns.

  5. 05

    The wells connect

    Pathways from the two wells meet. Fiber-optic sensing along each well and monitoring at the surface confirm it. Together they form the Thermal Lattice®.

  6. 06

    The loop

    Water goes down the injector, picks up heat as it crosses the lattice, and comes up the producer as superheated fluid. The power plant takes the heat and converts it to electricity, and the water is recirculated.

  7. 07

    Looking ahead

    Heat Harvester® models the wells and the rock to forecast power output over the years. Harvest the heat faster and power output is higher for a shorter time.

  8. 08

    A repeatable engineered energy solution

    From the same small pad, more well pairs can be drilled side by side and in deeper layers, with longer laterals. There is hot rock below us globally.

The three systems of MUSE™

Drill. Engineer. Harvest.

01 — Drilling
Carbon ChillTM

Supercritical CO₂ drilling built for temperatures that destroy conventional equipment, and horizontal wells that maximize contact with the rock.

Explore Carbon Chill™ →
02 — Reservoir
Thermal Lattice®

An engineered reservoir that opens a durable pathway network for heat: water moving through a large volume of hot rock, with the pathways staying open.

03 — Harvesting
Heat Harvester®

Forecasting how the reservoir and wells perform over years, so output can be contracted rather than hoped for.